Installation and maintenance essentials of vegetable basin tap

2020-08-08 10:03:49

In 1972, the expert committee of the world food and agriculture structure and the world health structure determined that the total tolerance of each person to lead per week was 3 milligrams. Children, infants, fetuses and pregnant women were more sensitive to lead. Lead can harm the nervous system, hematopoietic system and reproductive system of human beings, which is more harmful to children. It will affect their growth and development and intelligence growth, and even cause dementia in severe cases.


There are two important sources of lead in drinking water. One is the arbitrary discharge of industrial pollutants and waste water, resulting in water pollution; the other is the secondary pollution caused by traditional water delivery products manufacturing process such as faucets.


Lead in faucet ≠ harm to human body


Vegetable basin is an indispensable thing in the kitchen. Of course, the faucet is still in tension. The vegetable basin was originally planned for the convenience of our survival. But if the faucet is broken, what is the use of the basin? Then, how to install the faucet? Today we'll take a look at the main points of the installation of the faucet. Next, we'll take a look at the dishes Basin faucet detailed placement essentials, let's get to know each other.


1: connect the hose to the faucet


The first step for us to install the faucet is to first tighten a hose on the tap, then put it into the hole of the pot, try to pull it to see if the connection between the hose and the faucet is firm, and then we need to firmly install other fasteners on the faucet.


2: the faucet should be firm and good


The installation plan of the faucet in the vegetable basin is to pass the assembled faucet hose through the vegetable pot, connect it with the fastener, and then tighten it with screws and other small things. During the installation period, we should carefully debug. When the faucet is firm, we should carefully check whether the connection between the faucet and the pot is precise and whether it is loose.

开平不锈钢水龙头厂家

3: adjacent to intake


The third step in the installation plan of vegetable basin faucet is to connect with the water inlet. After we have fixed the faucet and the vegetable basin, we should put the vegetable basin in a firm position, and then connect the other end of the hose with the water inlet pipe. When we accept it, we should be careful. If it is divided into cold water and hot water, the left side is hot water, and the right side is cold water. After we have finished, the vegetable basin water The tap placement is completed.


How to arrange the taps in vegetable pots


If it is a faucet with constant temperature, we must check the hot and cold outlet of the water pipe before installing it. We should understand the deviation of the hot and cold water outlet, so as to avoid the wrong connection of the cold and hot water pipes, which may lead to the failure of the water tap in the vegetable basin. After the installation of the faucet, it is very frequently used. Because of the frequent movement, it is the time for us to arrange Be sure to tighten the nut to avoid some unnecessary poverty on the back. In addition, we have to clean all kinds of magazines and dregs in the pipeline before installation.


Vegetable basin tap clean and maintenance


The above said vegetable basin faucet placement, now it is its clean and maintenance, vegetable basin faucet in the clean time do not directly wipe its appearance with a wet towel, also do not let the tap encounter acid and alkali liquid, we can take a neutral detergent spray on soft cotton cloth, and then gently wipe its appearance, normal time we can use dry soft cotton cloth to wipe It's a copper faucet. We can use boiling water and detergent to scrub it, then dry it with a clean cloth or rinse it with water.


The article comes from Kaiping stainless steel faucet manufacturer http://www.llg365.com


Navigation Call About Product