Installation method of water tap

2020-08-08 10:03:49

Many people's faucets are broken. They buy a new one and don't know how to install it. In order to find a master for a faucet, I don't need to. Xiaobian thinks it's better to install it by himself. The following Kaiping stainless steel faucet manufacturers to explain the installation method of faucets, let's see how to install faucets.


Let's learn how to install various faucets.


First install the tool:


Hose, rubber washer, shower, drain, knee, decorative cap, etc., need to check whether the matching parts are complete before installation.


Installation steps:


1. Installation of single hole basin faucet


Pay attention to the diameter of the water outlet when purchasing the single handle hand basin faucet. Most of the water in the market belongs to the hard pipe, so you should pay attention to reserve the height of the upper nozzle, and 35 work points from the basin to the bottom is appropriate. When installing, special angle valve must be selected, and the angle valve must be fixed with the hot and cold water pipe of wall water outlet. When you find that there is a distance between the angle valve and the tap water pipe, go to buy a special extension pipe to connect. Remember, do not use other water pipes to connect, because if the water pressure is high, it is easy to fall off, water leakage, to your loss. If the inlet pipe is too long than the outlet pipe, cut off the part according to your needs. If the angle is not appropriate, it can be bent to the position you need. Remember: do not bend hard to 90 degrees or more. Please do not forget to buy the small connection of the faucet when installing the basin to drain water. Before you install, please don't forget to flush the pipe embedded in the wall in advance.

开平不锈钢水龙头厂家

2. Installation of shower and bathtub faucet (wall hanging)


When you buy a shower, bathtub, wall faucet, you can choose the appropriate height to bury the outlet pipe. The distance between hot and cold water pipes must be 15 cm. Before installation, you must not forget to flush the water pipe, so as to avoid the water quality being too hard and damaging the tap.


3. Concealed shower and bathtub faucet


After purchasing concealed faucet, the valve core of faucet should be embedded in the wall. Pay attention to the thickness of toilet wall before embedding. If the wall is too thin, the valve core will not be embedded. The plastic protective cover of the valve core should not be removed easily when the valve core is embedded, so as to avoid damage to the valve core by cement and other miscellaneous matters. In addition, when the valve core is embedded, attention should be paid to the direction of the valve core up and down, left and right, so as to avoid the wrong embedding of the valve core. When the wall mounted faucet is embedded with water inlet pipe, the size deviation can be adjusted by using the adjustable inflector.


4. Installation of thermostatic tap


Before installing the thermostatic faucet, please check whether the water pipe is hot on the left and cold on the right. Remember not to connect the hot and cold water pipes incorrectly, so as to prevent the faucet from working normally. Gas and solar water heaters cannot use thermostatic faucets because the water pressure is too low. Please don't forget to install hot and cold water filter when installing thermostatic faucet.


5. Installation of Single Hole Kitchen Faucet


Requirements are stable, because the kitchen faucet use frequency is high, in addition to be moved around, easy to loose, so the lock nut must be tightened. At present, there are some faucets on the market to fix the screw pipe and nut, which has a good effect. If the problem of removing water and pulling can be solved, it will be a popular trend in the future.


The article comes from Kaiping stainless steel faucet manufacturer http://www.llg365.com


Navigation Call About Product